5 Stage RO/DI System (Clear Housings)
Zip Code: State/Province: Country: | Calculate Shipping Rates Here! |
*******This Product has been******* *****customized/built in the USA*****
5 Stage Reverse Osmosis - Deionization System Model RO5CL50SCDIP (system available with reverse osmosis membrane options of - 24 gpd, 36 gpd, 50 gpd, 75 gpd or 100 gpd - select your gallons per day system from the RO membrane option listed above)
Note 1: The pricing listed above is for this 5 stage system with a 50 gallon per day RO membrane. The RO membrane capacity is your choice and the price for the system will vary by your selection of a RO membrane capacity from the option above. Example: Should you select the 24 gpd RO membrane, the price for this 5 stage system will be $153.95 or if you select the 75 gpd RO membrane, the price for this 5 stage system will be $159.95.
Note 2: The micron rating for the filters is your choice - click on the Sediment Micron and Carbon Micron options above and make your selection. Carbon Filter end cap color will vary by micron rating.
This Reverse Osmosis five stage system will provide top quality water and it has clear housings on the two pre-filters and on the housing that holds the DI refillable cartridge. This DI cartridge filter inserted into a clear housing is compatible with RO systems and will polish the water to the highest quality of zero (0) TDS. These features not only make this unit sparkle, they will also take the guess work out of replacement of filters. This is a quality unit from a company with over 20 years of water experience and hundreds of water items listed here on this web site.
_____________________________________________
This system includes:
1) 50 gallon per day Filmtec membrane (Optional capacity RO membrane available above)
2) Membrane housing
3) 3 clear housings - 10 inch
4) 1 Sediment filter - (9 3/4" x 2.5")
5) 1 Carbon block filter - (9 3/4" x 2.5")
6) 1 cartridge with 12.5 ounces of DI resin
7) Saddle valve kit
8) Flow restrictor (to match the RO membrane size selected above)
9) Automatic shut-off valve
10) Check valve
11) Drain clamp
12) Filter wrench
13) 4 gallon storage tank
14) Tubing - 4 colors @ 10 foot each - total of 40 feet
15) Fittings
16) Faucet kit
17) 1 Inline carbon filter (Polish Filter)
18) 1 Triple bracket
This is an assembled complete system (ready to be installed) and the package includes installation instructions.
Special Note # 1:
This RO system comes with a storage tank and with a faucet kit. The system is complete and ready for users to install under the sink, in the utility room , in the garage or other location for delivery of purified water to a drinking water faucet, refrigerator or ice maker.
Special Note # 2:
All of the sediment and carbon filter housings are standard 10 inch clear housings with 1/4 inch thread inlet and outlet ports. Clear housings will permit you to observe the filters and thereby allow you to monitor the depletion of the filters. This will take the guess work out of when to replace your filters.
___________________________________________
FILMTEC TW30-1812-50 Membrane Elements
FILMTECTM reverse osmosis membrane elements for home drinking water are the industry’s most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. FILMTEC elements are shipped dry for convenient handling and long shelf-life. These elements are NSF/ANSI Standard 58 listed. Equipment suppliers can take advantage of FilmTec’s Standard 58 listing and participation in the NSF Data Transfer Protocol to reduce costs for reduction claims for their systems.
FILMTEC home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi (please see the datasheet for more information).
Product Name : FILMTEC TW30-1812-50
Permeate Flow Rate : 50 gpd - (7.9) m3/d
Stabilized Salt Rejection (%) 98.0
Minimum Salt Rejection (%) 96.0
_____________________________________________
SEDIMENT FILTERS
These 10 inch x 2.5 inch sediment filters are made of 100% high purity polypropylene, surfactant free, binder free and adhesive free. These sediments have a special design to trap particulates. Four layers, with outside-in flow and step-by-step micron rating that effectively retains particles and extends the filter life with a much lower pressure drop. Sediment filters are in compliance with FDA requirements and they are NSF Standard 42 certified. Specifications; One (1), five (5), ten (10), twenty (20) or fifty (50) micron rating, up to 8 gallon flow rate, 10" length and 2.5 OD"
They have great particle holding capacity and are being used in a variety of applications such as pre-filters for reverse osmosis systems, pre-filters for water filtration units, aquarium pre-filters and being used as sediment collectors for whole house systems.
Sediment Filter Specifications and Data Information:
Filter - Length 9 7/8" x 2.5" diameter (commonly referred to as 10" x 2.5")
Enhanced Dirt Holding Capacity
High Consistency Melt Blow Polypropylene
Easy and Safe Cartridge Incineration and Disposal
Free of Surfactants, Binders and Adhesives
Ideal for use as pre-treatment to a RO Reverse Osmosis
Drinking Water System
Meets FDA compliance for food and beverage contact
Contains no wetting agents, solvents, antistatic agents or binders.
Available Micron Ratings:
1, 5, 10, 20 and 50
Bonded micro-fiber construction offers no fiber release
Superior chemical resistance and is not prone to bacterial attack
Performance Tested - NSF and FDA certified
_________________________________________
CARBON FILTER
This carbon block filter is manufactured with high purity Coconut Shell activated carbon with extruded activated carbon block construction. They do not release carbon fines and they are FDA compliant and they are NSF certified. These solid carbon block filters have combined the adsorption capability of carbon, with the ability of a solid block material to selectively strain out particles from the water that is being forced through the filter.
Activated carbon has an electro-positive charge added which results in this type of carbon attracting more chemicals and impurities. As the water passes through the positively charged carbon, the contaminants with their negative ions, are attracted to the carbon granules and thus extracted from the water.
The block of carbon strains out sediment, dirt, bacteria, microscopic worms, algae, asbestos and cryptosporidium. With just water pressure, this compacted solid carbon block is designed to filter sub micron size particles. This microstraining of the water will provide the cleanest and clearest drinking water available.
Activated carbon bonds to thousands of known chemicals. As water is forced through this solid block of carbon, it is forced to slow its flow speed and thereby increase the contact time with the carbon. This slowing of the flow allows the carbon bonding to take place and remove chemical pollutants like toxins, THM's, chlorine, pesticides, bad tastes, odors, etc.
Solid block carbon filters are very uniform and do not channel or bypass as conventional granular activated carbon (GAC) filters are know to do.
Because of the density of the solid block carbon filters, there is no room for bacteria to grow, so these filters do not become an incubator for bacteria as GAC filter are known to be.
These carbon block filters will fit most types of 10" x 2.5" filter housings on the market today and as noted previously, they will fit into the housings on nearly all water filtration and reverse osmosis systems. CTO carbon block filters preform well in both commercial and residential applications and they are the most widely used carbon filters on the market today.
Carbon Filter Specifications and Data Information:
Filter - Length 10" x 2.5" diameter
>99.5% Reduction of Particles (5 micron filter)
Enhanced Dirt Holding Capacity
No Release of Carbon Fines
Significantly Exceeds Performance of Traditional GAC and PAC Filters
6,000 gallons of chlorine removal capacity
Performance Tested - NSF and FDA certified
_________________________________________
Clear Housing
Top quality clear housing with 1/4 inch inlet and outlet ports. Clear housings will permit you to observe the filters and thereby allow you to monitor the depletion of the filters. This will take the guess work out of when to replace your filters.
Housing Specifications and Data Information:
> Material (sump and cap) - Polypropylene
> Material (o-ring) - EPDM
> Max. Temp. - 125 degrees (F)
> Min. Temp. - 40 degrees (F)
> Max. PSI - 125 psi (6.3 bar)
> Cycle Tests (@ 125 psi) - 150,000 cycles
> Threads - Straight
_________________________________________
Inline Carbon Water Filter
This 10" inline filter can be used with an Ice maker & Refrigerator, Reverse Osmosis system, Aquarium, coffee maker and other applications that require filtered water.
Taste & Odor Removal
Specifications:
Maximum Flow .75 GPM
Maximum Pressure 125 PSI
Maximum Temp 100 F
Service Life 1500 Gallons
Inline filters are composed of a high performance granulated activated carbon that polishes the product water (reverse osmosis system) from the storage tank to your water source requirement, eliminating taste and odor problems prior to use.
The activated carbon in this filter has an electro-positive charge added which results in this type of carbon attracting more chemicals and impurities. As the water passes through the positively charged carbon, the contaminants with their negative ions, are attracted to the carbon granules and thus extracted from the water.
____________________________________________
10" DI Refillable Filter Cartridge - Inserts into the 3rd standard 10 inch Clear Housing
This is a 10 inch refillable cartridge with 12.5 ounces of DI (Deionization - Demineralized) mixed bed color changing resin installed. When this DI filter is installed as the 4th stage (process) of a 5 stage Reverse Osmosis system, the 12.5 ounces of resin will (on average) process about 900 to 1,000 gallons of water.
Reverse Osmosis units are capable of removing 90% to 98% of the TDS (Total Dissolved Solids). If your water usage requires zero (0) TDS, this 10" refillable cartridge will provide the quality of water you are seeking. This DI cartridge filter inserted into a clear housing is compatible with RO systems and will polish the water to the highest quality of zero (0) TDS.
The cartridge is 2 5/8" x 10" with a cap that can be easily removed to dispose of the old resin and then refilled with new resin when your filter requires attention.
Our web site has replacement DI resin for your continued use of this DI filter housing.
_____________________________________________
Reverse Osmosis Storage Tank
This steel storage tank has a bladder with 10 psi for moving the water from the tank to the faucet and/or refrigerator.
Tank specifications;
1) 4 gallon bladder tank
2) Tanks diameter is 11 inches
3) Overall tank height is 16 1/2 inches including 1 1/2 inches for the tank shut off valve.
4) Tank shut off valve has a 1/4 inch quick connect fitting - just insert the 1/4 inch tubing into the quick connect on the shut off valve and your line is hooked up and ready to go.
5) These tanks are NSF approved.
6) Color may vary (white or blue)
_____________________________________________
Need extra filters - click on Sediment Filters, Carbon Filters or Sediment and Carbon Combos below and you will be transferred to those categories
Sediment Filters
Carbon Filters
Sediment and Carbon Combos
____________________________________________
Check our variety of Reverse Osmosis systems - 3 stage, 4 stage, 5 stage and 6 stage units - clear and white housings, 4 gallon, 14 gallons and 20 gallon storage tanks and RO membrane capacity of 24 gpd, 36 gpd, 50 gpg, 75 gpd and 100 gpd .
