Dual TDS Meter
Product Description
Dual Inline TDS Meter from HM Digital
-- Dual Mode -- Installs Inline -- Check the TDS level with the push of a button.
This sale is for one (1) dual inline TDS Meter with the capability of measuring both the incoming water and the purified water at any time. This unit allows you to be certain that your RO system is producing top quality water at all times.
Measure the tap water coming in vs. the purified water going out of your RO system.
Product Features:
*Displays TDS levels of the feed water and product water with in and out electrode probes.
* Highly efficient and accurate
* Advanced microprocessor technology
* Auto shut-off fuction conserves battery power - Unit shuts off automatically after 10 minutes
* Dual Range 0-9990 (from 0-999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm. the resolution is 10 ppm).
* Factory calibrated : meters are calibrated with a 342 ppm NaCl solution and can be recalibrated with a mini-screwdriver.
* Equipped with Quick Connect fittings
* Installs quickly and easily
* Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1,000 hours of continuous use.
Installation:
Cut the tubing leading out from the RO membrane housing and install the probe between the membrane housing and the ASO (Auto Shut Off) valve - the closer to the membrane housing the better. Insert the ends of the cut tubing into the quick connectors on the TDS meter "out" probe. Next, cut the inlet feed water tubing line to the RO system and insert the cut tubing into the quick connectors on the TDS meter "in" probe. You are done - it is that easy to install.
Check throughout our web site where you will find hundreds of items for your water equipment and replacement needs.
-- Dual Mode -- Installs Inline -- Check the TDS level with the push of a button.
This sale is for one (1) dual inline TDS Meter with the capability of measuring both the incoming water and the purified water at any time. This unit allows you to be certain that your RO system is producing top quality water at all times.
Measure the tap water coming in vs. the purified water going out of your RO system.
Product Features:
*Displays TDS levels of the feed water and product water with in and out electrode probes.
* Highly efficient and accurate
* Advanced microprocessor technology
* Auto shut-off fuction conserves battery power - Unit shuts off automatically after 10 minutes
* Dual Range 0-9990 (from 0-999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm. the resolution is 10 ppm).
* Factory calibrated : meters are calibrated with a 342 ppm NaCl solution and can be recalibrated with a mini-screwdriver.
* Equipped with Quick Connect fittings
* Installs quickly and easily
* Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1,000 hours of continuous use.
Installation:
Cut the tubing leading out from the RO membrane housing and install the probe between the membrane housing and the ASO (Auto Shut Off) valve - the closer to the membrane housing the better. Insert the ends of the cut tubing into the quick connectors on the TDS meter "out" probe. Next, cut the inlet feed water tubing line to the RO system and insert the cut tubing into the quick connectors on the TDS meter "in" probe. You are done - it is that easy to install.
Check throughout our web site where you will find hundreds of items for your water equipment and replacement needs.