1 Sediment 1 Carbon 1 InLine Carbon Combo - 10" x 2.5" 4 pin UV bulb

  • 5 Stage RO+UV (4 Pin) Replacement
Click Image(s) to Enlarge
Item#SCI4pinUV
Regular Price:$112.95
Sale Price:$101.95
Qty:
Questions? Contact Us!

Product Description

Filter Combo of one Sediment, One Carbon Block, One InLine Carbon Water Filter, and one 1 GPM Replacement UV bulb (4 pins on one end)

This sale is for One (1) 10 inch x 2.5 inch sediment filter, One (1) 10 inch x 2.5 inch carbon filter, One InLine Carbon- these filters are individually wrapped - and 1 Replacement 1 GPM UV bulb (4 pins on one end)

The micron rating for these filters is your choice - click on the Sediment Micron and the Carbon Micron options above and make your selection. Note: You will receive 1 sediment filter from your sediment selection and 1 carbon filter from selection. Filter end cap color will vary by micron rating.

The In-Line Carbon filter is available with Quick Connect or FPT 1/4" fitting, your choice of Quick Connect or FPT Fitting. When the buyer does not make a selection, we ship Quick Connect.




SEDIMENT FILTERS

These sediment replacement filters are for use with Reverse Osmosis, Whole House, Aquarium and Drinking Water Filtration Systems. These filters fit into a standard 10 inch x 2.5 inch filter housings, used by most reverse osmosis systems, whole house water filtration units and drinking water filter systems.

These 10 inch x 2.5 inch sediment filters are made of 100% high purity polypropylene, surfactant free, binder free and adhesive free. This sediment filter has a special design to trap particulates. Four layers, with outside-in flow and step-by-step micron rating that effectively retains particles and extends the filter life with a much lower pressure drop. Sediment filters are in compliance with FDA requirements and they are NSF Standard 42 certified.

They have great particle holding capacity and are being used in a variety of applications such as pre-filters for reverse osmosis systems, pre-filters for water filtration units, aquarium pre-filters and being used as sediment collectors for whole house systems.

Specifications and Data Information - Sediment Filter:

Filter - Length 10" x 2.5" diameter

Enhanced Dirt Holding Capacity

High Consistency Melt Blow Polypropylene

Easy and Safe Cartridge Incineration and Disposal

Free of Surfactants, Binders and Adhesives

Ideal for use as pre-treatment to a RO Reverse Osmosis Drinking Water System

Meets FDA compliance for food and beverage contact

Contains no wetting agents, solvents, antistatic agents or binders.

Available Micron Ratings: 1, 5, 10, 20/25 and 50

Bonded micro-fiber construction offers no fiber release

Superior chemical resistance and is not prone to bacterial attack

Performance Tested - NSF and FDA certified




CARBON FILTERS

These carbon block filters are manufactured with high purity Coconut Shell activated carbon with extruded activated carbon block construction. They do not release carbon fines and they are FDA compliant and they are NSF certified. These solid carbon block filters have combined the adsorption capability of carbon, with the ability of a solid block material to selectively strain out particles from the water that is being forced through the filter.

Activated carbon has an electro-positive charge added which results in this type of carbon attracting more chemicals and impurities. As the water passes through the positively charged carbon, the contaminants with their negative ions, are attracted to the carbon granules and thus extracted from the water.

The block of carbon strains out sediment, dirt, bacteria, microscopic worms, algae, asbestos and cryptosporidium. With just water pressure, this compacted solid carbon block is designed to filter sub micron size particles. This microstraining of the water will provide clean and clear drinking water.

Activated carbon bonds to thousands of known chemicals. As water is forced through this solid block of carbon, it is forced to slow its flow speed and thereby increase the contact time with the carbon. This slowing of the flow allows the carbon bonding to take place and remove chemical pollutants like toxins, THM's, chlorine, pesticides, bad tastes, odors, etc.

Solid block carbon filters are very uniform and do not channel or bypass as conventional granular activated carbon (GAC) filters are know to do.

Because of the density of the solid block carbon filters, there is no room for bacteria to grow, so these filters do not become an incubator for bacteria as GAC filter are known to be.

These carbon block filters will fit most types of 10" x 2.5" filter housings on the market today and as noted previously, they will fit into the housings on nearly all water filtration and reverse osmosis systems. CTO carbon block filters preform well in both commercial and residential applications and they are the most widely used carbon filters on the market today.

Specifications and Data Information - Carbon Filter:

Filter - Length 10" x 2.5" diameter

>99.5% Reduction of Particles (5 micron filter)

Enhanced Dirt Holding Capacity

No Release of Carbon Fines

Significantly Exceeds Performance of Traditional GAC and PAC Filters

Up to 8,000 gallons of chlorine removal capacity

Performance Tested - NSF and FDA certified




InLine CARBON FILTERS

Taste & Odor Removal

Specifications:

Maximum Flow .75 GPM

Maximum Pressure 125 PSI

Maximum Temp 100 F

Service Life 1500 Gal

Inline filters are composed of a high performance granulated activated carbon that polishes the product water from the storage tank to your water source requirement, eliminating taste and odor problems prior to use.

Activated carbon has an electro-positive charge added which results in this type of carbon attracting more chemicals and impurities. As the water passes through the positively charged carbon, the contaminants with their negative ions, are attracted to the carbon granules and thus extracted from the water.






UV Ultraviolet Replacement Lamp is suitable for replacing the lamp in Ultraviolet 1 gallon per minute unit. We offer more than one type of 1 gallon per minute UV bulb. Before you order, be certain that your current bulb has these specifications; a) 11 1/2" long, b) 4 pins on one end of the bulb and c) 12 watt bulb.

UV rays penetrate the cells of harmful bacteria and viruses in our drinking water destroying their ability to reproduce. Without the ability to reproduce, these organisms die and no longer pose a health threat. UV is a low cost and highly effective process for destroying 99.99% of harmful microorganisms(E Coli, Coliforms, Viruses Fungi, Algae, Spores etc.).

This replacement lamp will provide your UV system with safe drinking water without the use of chemicals.

This one (1) gallon per minute bulb can be used with a Reverse Osmosis system, or a filter system. This bulb will work well for you in untreated water such as a well, lake and river water.

Ultraviolet is recognized as superior compared to other methods of disinfection;

* UV is very safe. There are no dangerous chemicals to handle or monitor. Disinfection results are immediate. * UV has a low initial system cost and a very low cost of operation. * UV is environmentally friendly. There are no byproducts from the UV process, and nothing is discharged into the environment. * UV causes no change to the taste or odor of the water disinfected. It is impossible to over-treat water with UV. * UV systems are very easy to install and maintain. * UV disinfection is compatible with all other forms of water treatment.

How UV works. The water enters an ultraviolet sterilization chamber where any viruses, bacteria, mold, and other living microorganisms are bombarded with special, intense light of a specific wave length. The UV light penetrates the wall of the organisms and attacks their DNA structure leaving the organism unable to reproduce (or "dead"). UV technology is recognized by the EPA as one of four approved methods of sterilizing water, and is preferable over the other three methods (chlorine, iodine, and distillation) due to the cost of treatment and effectiveness of UV (UV works almost instantaneously, leaving no residuals or chemicals in the water). This UV module operates for a full year at 30,000 microwatt seconds/cm². As a point of reference, the table below is a list of common bacteria and viruses, and the dosage required to render them harmless.

BACTERIA : Bacillus, anthacis B., Megaatherium sp. (veg.), B. Megaatherium sp. (spores), B. paratyphosus, B. subtilis, B. subtilis spores, Clostridium tetani, Corynebacterium diphtheria, Dysentery baccili, Eberthella typhosa, Escherichia coli, Leptospira, Micrococcus candidus, Micrococcus sphaeroides, Mycobacterium tuberculosis, Neisseria catarrhalis, Phytomonas tumefaciens, Proteus vulgaris, Pseudomonas aeruginosa, Pseudomonas fluorescens, Salmonella, S. enteritidis, S. typhimurium, S. typhosa, Sarcina lutea, Serratia marcescens, Shigella dysenteriae, Shigella paradysenteriae, Spirillum rubrum, Staphylococcus albus, Staphylococcus aureus, Streptococcus hemolyticus, Streptococcus viridans, Vibrio cholerae

MOLD SPORES : Mucor racemosus A, Mucor racemosus B, Oospora lactis Penicillium expansum

PROTOZOA : Chlorella vulgaris (algae)

VIRUSE : Bacteriophage (E. coli), Hepatitus virus, Influenza virus, Polio virus

YEAST : Bakers' yeast, Brewers' yeast, Common yeast cake, Saccharomyces cerevisiae, Saccharomyces ellipsoideus, Saccharomyces sp.

Specifications:

Flow Rate 1 gallon per minute

Lamp Current 0.162 A

Watts 12

Manufacturer Est. life 5,000 Hours




These lamps are individually wrapped and fresh from the factory.




Check throughout our web site where you will find hundreds of items for your water equipment and replacement needs.