Quantity of Two - 10 Inch x 2 1/2 Inch Carbon Block Water Filter
This sale is for two (2) ten inch x 2.5 inch replacement carbon filter for Reverse Osmosis
and Filter Water Systems
. (Reverse Osmosis membranes
and sediment filters
can be purchased from our store items).
Most reverse osmosis manufacturers suggest that filter life will be 6 months to one year depending upon the quality of your source water. Properly serviced RO systems (replacing the filters in your RO or Filter unit) will extend the membranes life.
The micron rating for this filter is your choice - click on the Carbon Micron option above and make your selection. Filter end cap color may vary by micron rating.
Note: Click on the pictures above (located just below the larger photo) and you will see an enlarged view of added photos and information
Carbon Block Filter
This carbon block filter is manufactured with high purity Coconut Shell activated carbon with extruded activated carbon block construction. They do not release carbon fines and they are FDA compliant and they are NSF certified. These solid carbon block filters have combined the adsorption capability of carbon, with the ability of a solid block material to selectively strain out particles from the water that is being forced through the filter.
Activated carbon has an electro-positive charge added which results in this type of carbon attracting more chemicals and impurities. As the water passes through the positively charged carbon, the contaminants with their negative ions, are attracted to the carbon granules and thus extracted from the water.
The block of carbon strains out sediment, dirt, bacteria, microscopic worms, algae, asbestos and cryptosporidium. With just water pressure, this compacted solid carbon block is designed to filter sub micron size particles. This microstraining of the water will provide clean and clear drinking water.
Activated carbon bonds to thousands of known chemicals. As water is forced through this solid block of carbon, it is forced to slow its flow speed and thereby increase the contact time with the carbon. This slowing of the flow allows the carbon bonding to take place and remove chemical pollutants like toxins, THM's, chlorine, pesticides, bad tastes, odors, etc.
Solid block carbon filters are very uniform and do not channel or bypass as conventional granular activated carbon (GAC) filters are know to do.
Because of the density of the solid block carbon filters, there is no room for bacteria to grow, so these filters do not become an incubator for bacteria as GAC filter are known to be.
These carbon block filters will fit most types of 10" x 2.5" filter housings on the market today and as noted previously, they will fit into the housings on nearly all water filtration and reverse osmosis systems. CTO carbon block filters preform well in both commercial and residential applications and they are the most widely used carbon filters on the market today.
Filter - Length 10" x 2.5" diameter
>99.5% Reduction of Particles (5 micron filter)
Enhanced Dirt Holding Capacity
No Release of Carbon Fines
Significantly Exceeds Performance of Traditional GAC and PAC Filters
Up to 8,000 gallons of chlorine removal capacity
Performance Tested - NSF and FDA certified
Check the pricing on our larger packages and save even more.