Quantity of Three - 10 Inch x 2.5 Inch Sediment Water Filters
This sale is for three (3) ten inch x 2.5 inch replacement sediment filters for Reverse Osmosis
and Filter Water Systems
. (Reverse Osmosis membranes
and carbon filters
can be purchased here on our web site).
Most reverse osmosis manufacturers suggest that filter life will be 6 months to one year depending upon the quality of your source water. Properly serviced RO systems (replacing the filters in your RO or Filter unit) will extend the membranes life.
The micron rating for this filter is your choice - click on the Sediment Micron option above and make your selection.
These sediment replacement filters are for use with Reverse Osmosis, Whole House, Aquarium and Drinking Water Filtration Systems. These filters fit into a standard 10 inch x 2.5 inch filter housings, used by most reverse osmosis systems, whole house water filtration units and drinking water filter systems.
These 10 inch x 2.5 inch sediment filters are made of 100% high purity polypropylene, surfactant free, binder free and adhesive free. This sediment filter has a special design to trap particulates. Four layers, with outside-in flow and step-by-step micron rating that effectively retains particles and extends the filter life with a much lower pressure drop. Sediment filters are in compliance with FDA requirements and they are NSF Standard 42 certified.
They have great particle holding capacity and are being used in a variety of applications such as pre-filters for reverse osmosis systems, pre-filters for water filtration units, aquarium pre-filters and being used as sediment collectors for whole house systems.
Specifications and Data Information - Sediment Filter:
Filter - Length 10" x 2.5" diameter
Enhanced Dirt Holding Capacity
High Consistency Melt Blow Polypropylene
Easy and Safe Cartridge Incineration and Disposal
Free of Surfactants, Binders and Adhesives
Ideal for use as pre-treatment to a RO Reverse Osmosis
Drinking Water System
Meets FDA compliance for food and beverage contact
Contains no wetting agents, solvents, antistatic agents or binders.
Available Micron Ratings:
1, 5, 10, 20 and 50
Bonded micro-fiber construction offers no fiber release
Superior chemical resistance and is not prone to bacterial attack
Performance Tested - NSF and FDA certified
Check the pricing on our larger packages and save even more.